-Phillips head screwdriver
-Flat head screwdriver
-Replacement bulbs (if necessary)
Steps:
1. Open the trunk of your 2007 Mustang.
2. Locate the two Phillips head screws on the inside of the trunk, just above the tail light. Remove these screws.
3. Use the flat head screwdriver to pry the tail light assembly out of the trunk. Be careful not to damage the paint on your Mustang.
4. Remove the old bulb by turning it counterclockwise.
5. Replace the old bulb with the new bulb by turning it clockwise until it is snug.
6. Reinstall the tail light assembly by pressing it back into place and securing it with the two Phillips head screws.
7. Repeat steps 1-6 for the other tail light.
8. Test the tail lights to make sure they are working properly.
