1. Park your car in a safe location and turn off the engine.
2. Open the trunk of your car.
3. Locate the access panel for the tail light assembly. It is usually located on the inside of the trunk, near the tail light.
4. Use a screwdriver or other pry tool to remove the access panel.
5. Once the access panel is removed, you will be able to see the tail light assembly.
6. Disconnect the electrical connector from the tail light assembly.
7. Remove the two bolts that hold the tail light assembly in place.
8. Once the bolts are removed, you can remove the tail light assembly from the car.
9. To install the new tail light assembly, simply reverse the steps above.
_Here are some additional tips for changing the tail light in a 2006 BMW 325i:_
- Be careful not to break the access panel when removing it.
- Make sure that you disconnect the electrical connector before removing the tail light assembly.
- If you are not comfortable changing the tail light yourself, you can have it done by a qualified mechanic.
