1. Open the trunk of your Peugeot 607.
2. Locate the two plastic covers on the inside of the trunk, near the rear lights.
3. Use a flat-head screwdriver to pry open the plastic covers.
4. Once the covers are removed, you will see two screws holding the rear light cover in place.
5. Use a Phillips-head screwdriver to remove the two screws.
6. Once the screws are removed, you can pull the rear light cover off of the car.
7. To reinstall the rear light cover, simply reverse the steps above.
Here are some additional tips for removing the rear light cover on a Peugeot 607:
- Be careful not to damage the plastic covers or the screws.
- If you are having difficulty removing the rear light cover, you can use a heat gun to loosen the adhesive holding it in place.
- Be sure to reconnect the electrical connector to the rear light before reinstalling the cover.
