1. A set of replacement number plate light bulbs.
2. A flat-head screwdriver.
3. Approximately five minutes of time.
Instructions:
1. Open the trunk of your car.
2. There is a hole located on the rear light fixture. Insert a flat-head screwdriver into the hole.
3. Turn the screwdriver counterclockwise until the lens cover pops out.
4. Remove the lens cover and set it aside.
5. Remove the old bulb by turning it counterclockwise and take it out of the holder.
6. Insert the new bulb into the holder and turn it clockwise until it is secure.
7. Put the lens cover back in place and insert it into the slot on the rear light fixture.
8. Turn the screwdriver clockwise until the cover snaps back into place.
9. You can now close the trunk of your car.
