* Size: M14x1.5
* Thread Length: 25 mm
* Material: Steel or aluminum
* Gasket: Copper or rubber
Location:
The oil drain plug is located on the bottom of the oil pan, near the front of the engine. It is typically accessed from underneath the car.
Removal:
1. Place an oil drain pan under the oil drain plug.
2. Loosen the oil drain plug with a wrench.
3. Allow the oil to drain completely.
4. Replace the oil drain plug and tighten it securely.
Tips:
* Be sure to use the correct size and type of oil drain plug for your vehicle.
* If you are unable to loosen the oil drain plug, you may need to use a breaker bar or impact wrench.
* Be careful not to overtighten the oil drain plug, as this can damage the oil pan.
