Oil Drain Plug
Engine - 3/4" 1" deep drain plug (17 mm hex with 1/4" hex for safety wire)
Locate the oil drain plug underneath the engine. It will be a 3/4" 1" deep drain plug (17 mm hex with 1/4" hex for safety wire)
Place an oil pan under the drain plug to catch the draining oil.
Loosen the drain plug by turning it counterclockwise with a 17 mm wrench. Be careful not to drop the drain plug into the oil pan.
Allow the oil to drain completely into the oil pan.
Replace the drain plug by tightening it clockwise with a 17 mm wrench. Tighten the plug snugly, but do not overtighten it.
