Tools:
- Wire stripper
- Crimping tool
- Soldering iron
- Solder
- Heat shrink tubing
- Phillips head screwdriver
- Flat head screwdriver
- Wrench set
Materials:
- Shark Motorcycle audio amplifier
- Amplifier wiring kit
- Speaker wire
- RCA cables
- Ground wire
- Battery tender lead
Instructions:
1. Disconnect the negative battery terminal of your motorcycle.
2. Remove the fairing or saddlebag on the side of the motorcycle where you want to mount the amplifier.
3. Find a suitable location for the amplifier. It should be mounted in a dry and secure location, away from any heat sources or moving parts.
4. Mount the amplifier using the provided hardware.
5. Connect the positive terminal of the amplifier to the positive terminal of the battery using the red wire from the amplifier wiring kit.
6. Connect the negative terminal of the amplifier to the negative terminal of the battery using the black wire from the amplifier wiring kit.
7. Connect the speaker outputs of the amplifier to the speakers using speaker wire.
8. Connect the RCA inputs of the amplifier to the RCA outputs of your audio source.
9. Connect the ground wire from the amplifier to a metal surface on the motorcycle frame.
10. Connect the battery tender lead to the positive terminal of the battery and the other end to the battery tender input on the amplifier.
11. Turn on the amplifier and adjust the volume and bass settings to your liking.
12. Replace the fairing or saddlebag and reconnect the negative battery terminal.
Your Shark Motorcycle audio amplifier is now installed and ready to use. Enjoy your music while riding your Harley Davidson Heritage motorcycle!
Note: If you are not comfortable performing this installation yourself, you can have it done by a qualified audio installer.
