1. Park your motorcycle on a level surface.
2. Turn off the engine and allow it to cool down.
3. Locate the oil drain plug on the bottom of the engine crankcase. It is typically a 17mm hex head bolt.
4. Place an oil drain pan under the oil drain plug.
5. Use a 17mm wrench to loosen and remove the oil drain plug.
6. Allow the oil to drain completely from the engine crankcase.
7. Reinstall the oil drain plug and tighten it securely.
Remember:
> - Be careful not to overtighten the oil drain plug, as this can damage the threads.
> - Always replace the oil drain plug washer when changing the oil.
