1. Park the motorcycle on a level surface and turn off the engine.
2. Locate the rear shock adjustment knob. On most Dyna Wide Glides, this knob is located on the right side of the motorcycle, near the rear axle.
3. Turn the adjustment knob clockwise to increase the spring preload, or counterclockwise to decrease the spring preload.
4. The spring preload should be set so that the motorcycle sags approximately 1 inch (25 mm) when you sit on it.
5. Once you have set the spring preload, tighten the locknut on the adjustment knob to prevent it from moving.
6. Test ride the motorcycle to make sure that the rear shock is properly adjusted.
Here are some additional tips for adjusting the rear shock on a Harley Davidson Dyna Wide Glide:
* If you are unsure of how to adjust the rear shock, consult your motorcycle's owner's manual or a qualified mechanic.
* When adjusting the rear shock, make small adjustments and test ride the motorcycle after each adjustment.
* The rear shock should be adjusted according to your weight and riding style.
* If you are carrying a passenger, you will need to increase the spring preload to compensate for the additional weight.
* If you are riding on rough roads, you may want to increase the spring preload to provide a more comfortable ride.
