2. Locate the kickstand spring. The kickstand spring is a small, metal coil spring located on the underside of the kickstand.
3. Remove the cotter pin that holds the spring in place. Use a pair of pliers to spread the cotter pin and remove it from the hole.
4. Remove the old spring. Once the cotter pin is removed, you can pull the old spring off of the kickstand.
5. Install the new spring. Slide the new spring onto the kickstand.
6. Reinsert the cotter pin. Use a pair of pliers to insert the cotter pin through the hole in the kickstand and spring. Spread the cotter pin to secure it in place.
7. Test the kickstand. Make sure that the kickstand spring is properly installed by pushing down on the kickstand. The kickstand should return to its original position when you release it.
