Before you begin:
* Park your car on a level surface. Engage the parking brake.
* Turn off the ignition.
* Gather your new wiper blades. Make sure you buy the correct size for your 1996 Camaro. Check your owner's manual or a parts store website to be certain.
Procedure (assuming hook-type arms, the most common):
1. Lift the wiper arm: Carefully lift the wiper arm away from the windshield. You may need to gently pry it up with your fingers, but avoid using excessive force. It's helpful to have a rag to protect the paint from scratches.
2. Locate the connection: Look at the connection point between the wiper arm and the wiper blade. You'll see a metal hook.
3. Release the old blade: With the arm lifted, there are typically two ways to release the hook:
* Push and lift: Some hook types require you to push on the hook while lifting up on the blade to release it.
* Squeeze and lift: Others require you to squeeze a tab or lever near the hook to release the blade. The pressure point varies depending on the manufacturer. Experiment with gentle pressure in different spots. Look closely for a release point.
4. Remove the old blade: Once the hook is released, the old blade should simply slide or pull off.
5. Attach the new blade: Align the new blade with the hook on the wiper arm. It usually snaps on. There might be a slight click or resistance indicating secure placement.
6. Repeat for the other side: Repeat steps 1-5 for the passenger-side wiper blade.
7. Lower the wiper arms: Gently lower the wiper arms back onto the windshield.
Procedure (if you have push-button/clip-type arms):
1. Lift the wiper arm.
2. Locate the release mechanism: There will be a button or a small clip that needs to be pressed or manipulated to release the blade. The exact location and mechanism varies widely by manufacturer. Consult your owner's manual or look closely at the connection point for a button or small tab to press.
3. Remove the old blade: Once the release mechanism is engaged, the old blade should come off.
4. Attach the new blade: Follow the manufacturer's instructions to attach the new blade. Typically, it will simply snap into place.
5. Repeat for the other side.
6. Lower the wiper arms.
Important Considerations:
* If you are unsure: If you are struggling to release the old blades, consult a repair manual specific to your 1996 Camaro or take it to a professional. Forcing things can damage the wiper arm or the mechanism.
* Take pictures: Before starting, take pictures of how the old blades are attached. This can be a great visual aid if you get stuck.
* Use caution: Be careful not to scratch your windshield.
Remember to consult your owner's manual for specific instructions relevant to your 1996 Camaro. The above is a general guide, and the exact process may vary slightly.
