* Clutch linkage: This connects the clutch pedal to the transmission. You'll need to disconnect it. This usually involves removing a few bolts or clips, depending on the specific linkage design. Consult a repair manual for your specific year and model to determine the exact procedure.
* Shift linkage: This connects the shifter to the transmission. Again, this needs to be disconnected, usually involving removing linkage rods or cables and their associated mounts. Refer to your repair manual.
* Driveshaft: The driveshaft connects the transmission to the transfer case. You'll need to disconnect this at the transmission end. This typically involves unbolting a flange.
* Possibly a starter motor: Depending on the access, you may need to remove or at least loosen the starter motor to give yourself enough room to maneuver the transmission.
* Transmission mount(s): The transmission is mounted to the vehicle's frame. Removing these mounts will be necessary, but they are likely rubber bushings and not bolts. They'll need to be separated from the transmission and frame.
The Removal Process (General):
1. Disconnect the battery: This is crucial for safety.
2. Consult a repair manual: This is *absolutely essential*. A Haynes or Chilton manual will show you diagrams and detailed instructions, specific to your 1992 Wrangler model. Generic advice online won't cover all the nuances.
3. Disconnect the clutch linkage and shift linkage.
4. Disconnect the driveshaft.
5. Remove the transmission mount(s).
6. Remove any other obstructions: This might include things like the starter, wiring harnesses that could be in the way, or even the exhaust system (possibly, depending on your approach).
7. Carefully maneuver the transmission out: It will likely require some careful rocking and maneuvering. Having a transmission jack is highly recommended to support the weight safely. Two people are almost always needed for this part of the job.
Important Safety Notes:
* Support the transmission: Use a transmission jack to support the weight of the transmission at all times. This is crucial to avoid injury and damage.
* Proper tools: You will need various sockets, wrenches, and possibly specialized transmission tools.
* Work space: You need ample space to work comfortably and safely.
* Repair manual: As stated above, a repair manual is vital. It will save you time, prevent mistakes, and increase safety.
Attempting this without a repair manual and the appropriate tools and knowledge is highly discouraged. The job is complex and requires mechanical aptitude. If you're not comfortable working on your vehicle's drivetrain, it's best to have a qualified mechanic perform this work.
