1. Gentle Persuasion:
* Look closely: Examine the button and the area around it. See if there are any small slots, seams, or release points. Sometimes a very tiny flathead screwdriver or a similar thin, flat tool can be gently inserted to pry the button loose. Be extremely careful not to scratch the mirror housing or break the button.
* Try pulling: Before using tools, try gently pulling or wiggling the button. It might just pop off.
2. If gentle methods fail:
* Use a plastic pry tool: These are designed to avoid scratching surfaces. Insert the tool carefully into any seams or gaps you find. Work slowly and apply even pressure to avoid damage.
* Use a very thin flathead screwdriver (as a last resort): Only use this if you're absolutely sure there's a small release mechanism you can access and you are incredibly careful. Cover the screwdriver's tip with masking tape to minimize the risk of scratching.
Important Considerations:
* Take pictures: Before you start, take clear pictures of the button's position and how it's attached. This will be invaluable when you reassemble it.
* Patience is key: Force is the enemy here. Work slowly and carefully. If something doesn't budge easily, stop and reassess your approach.
* Replace if damaged: If the button breaks during removal, you'll likely need to find a replacement. Check online auto parts stores or salvage yards.
After Removing the Button:
Once the button is removed, clean the area thoroughly before applying adhesive. Make sure the adhesive you use is appropriate for both the plastic of the mirror housing and the glass of the windshield. Allow the adhesive to cure completely before reattaching the mirror.
Disclaimer: I cannot guarantee this will work for your specific vehicle. These are general instructions, and the exact method may differ slightly. If you're uncomfortable attempting this yourself, it's best to consult a professional auto glass repair shop. They have the tools and expertise to handle the job safely and efficiently.
