Here's a general outline of the process. This is NOT a complete guide and should not be followed without consulting a detailed repair manual specific to your Typhoon's year and engine. You'll need a factory service manual or a reputable aftermarket one like a Haynes or Chilton manual.
1. Preparation:
* Safety First: Disconnect the negative battery terminal. Wear safety glasses and gloves.
* Gather Tools and Parts: You'll need specialized tools including valve spring compressors, socket sets, torque wrenches, and of course, the correct replacement pushrod(s). Get the correct pushrod length; using the wrong one can cause catastrophic engine failure.
* Identify the Faulty Pushrod: Determine which cylinder is experiencing the problem (low compression, valve noise, etc.).
2. Accessing the Pushrods:
* Remove the Valve Covers: This usually involves removing various other components depending on the engine's configuration (air intake, etc.).
* Locate the Faulty Pushrod: Carefully examine the pushrods for bends, damage, or wear.
3. Pushrod Removal and Replacement:
* This is where the difficulty lies. You'll almost certainly need valve spring compressors to carefully remove the valve springs and rocker arms to access and remove the pushrod. This requires a lot of precision to avoid damaging the valves, springs, or other components.
* Install the New Pushrod: Carefully install the new pushrod, ensuring it's properly seated.
* Reinstall Rocker Arms and Valve Springs: This step requires the same precision as removal. Incorrectly installed springs can cause engine damage.
4. Reassembly:
* Reinstall Valve Covers: Carefully replace the valve covers and related components.
* Reconnect Battery: Reconnect the negative battery terminal.
5. Verification:
* Check for Leaks: Check for any oil leaks around the valve covers.
* Start the Engine: Listen carefully for any unusual noises. If the problem persists, you may have missed something or there's another underlying issue.
Important Considerations:
* Engine Timing: Disturbing the valve train can affect engine timing. You may need to reset or verify the timing after the repair.
* Professional Help: If you're not comfortable performing this repair, take your Typhoon to a qualified mechanic. The cost of engine damage from a mistake far outweighs the cost of professional labor.
* Manual is Crucial: The steps above are highly simplified. Consult a repair manual for detailed instructions, torque specifications, and diagrams specific to your vehicle's year and engine. The manual will also help you identify the proper tools needed.
Working on a turbocharged engine like the one in the Typhoon adds complexity. This repair isn't a DIY project for beginners. Safety and proper procedure are paramount. If in doubt, seek professional help.
