Method 1: Using the Odometer (for simpler systems):
This method is common for older vehicles or those with a less sophisticated system. It typically involves cycling the ignition switch on and off repeatedly.
1. Turn the ignition key to the "ON" position (but don't start the car). The dashboard lights should illuminate.
2. Locate the odometer/tripmeter buttons. Usually, these are on the steering wheel or near the instrument cluster.
3. Press and hold a specific button combination. This is the crucial part that varies by model year and potentially even trim level of the 2008 Avenger. Unfortunately, the exact button sequence isn't consistently documented. You might need to experiment with:
* Holding down the trip odometer reset button while turning the ignition on and off a few times.
* Repeatedly pressing and releasing a specific button while the ignition is on.
4. Look for the oil change light to go out. If it works, the light should extinguish after a few cycles or once you release the button(s).
Method 2: Using the Electronic Oil Life Monitor (more sophisticated systems):
Some 2008 Avengers might have a more sophisticated oil-life monitor system that's tied to your driving habits and oil type. This system calculates the remaining oil life percentage. If you have this, resetting involves adjusting the oil life monitor percentage to 100%. The procedure is typically like this but again, might vary slightly:
1. Start the vehicle.
2. Navigate to the vehicle information menu. This is usually accessed through the dashboard's infotainment system. You'll likely need to press buttons on the steering wheel or a button on the dashboard to cycle through the different menus until you find the oil life information. Look for things like "oil life," "oil change," or a similar option.
3. Select the oil life percentage display.
4. Find the reset option. The method to reset will vary greatly depending on your infotainment system. Some systems have a direct "reset" button, while others might require selecting a "reset" option from a menu.
5. Confirm the reset.
If neither of these methods works:
* Consult your owner's manual: Your owner's manual is the definitive guide. It should have precise instructions for resetting the oil change indicator.
* Search online: A more specific search online, including your Avenger's trim level (e.g., "2008 Dodge Avenger SE oil change light reset"), might yield more helpful results.
* Visit a Dodge dealership or mechanic: If you can't find the information yourself, a qualified mechanic can easily reset the light.
Remember, *resetting the light doesn't actually change your oil*. Change your oil at the recommended intervals (check your owner's manual for the specific recommendation for your engine and driving conditions) regardless of the light's status.
