When you are changing the rear turn signal bulb on a 1999 Chrysler Intrepid after remove all of plastic wing-nuts how do tail light assembly?

After removing the plastic wing nuts (and potentially other fasteners depending on the specific Intrepid model and trim level), the taillight assembly on a 1999 Chrysler Intrepid typically comes out relatively straightforwardly. However, there might be some variation. Here's a general procedure and things to watch out for:

1. Gently wiggle the assembly: Once the nuts are off, don't just pull. Gently rock the taillight assembly back and forth. There may be some clips holding it in place. You might need to use a plastic trim tool or a flat-head screwdriver (wrapped in tape to prevent scratching) to carefully pry around the edges if it's resisting.

2. Electrical Connector: You'll feel the electrical connector to the taillight assembly. There's usually a retaining clip or latch you need to depress or squeeze to release the connector. This is crucial to do before fully removing the taillight to avoid damaging wires.

3. Inspect for other fasteners: Some Intrepids might have additional small screws or clips hidden behind the taillight assembly or within the area where it sits. If you're having trouble, a quick online search for "1999 Chrysler Intrepid taillight removal" with images might reveal if there are additional fasteners you missed.

4. Bulb Replacement: Once the taillight is free, you should see the bulb socket. Usually, there's a twist-and-pull or a gentle tug to remove the bulb holder. Replace the bulb with an identical type (check the old bulb for wattage and specifications).

5. Reassembly: Carefully reverse the process. Make sure the electrical connector snaps back into place securely. If the assembly is difficult to put back, try aligning it carefully before pressing it in.

Important Considerations:

* Consult a Repair Manual: A repair manual specific to your 1999 Chrysler Intrepid will provide detailed instructions and diagrams. This is the best way to ensure you don't damage anything during the process.

* Gentle Pressure: Always use gentle pressure to avoid breaking the plastic clips.

* Proper Bulb Type: Use the correct replacement bulb type. Getting the wrong wattage or type could damage the wiring or cause premature bulb failure.

* Photos: Before you start, consider taking pictures of the process. This will be invaluable if you get stuck during reassembly.

If you are still struggling, searching YouTube for "1999 Chrysler Intrepid taillight bulb replacement" might yield helpful video tutorials. Remember safety first! If you're not comfortable doing this yourself, it's always best to consult a mechanic.