1. Inflate Tires: Inflate all four tires to the recommended pressure listed on the sticker located on the driver's side doorjamb or in your owner's manual. This is crucial. The system won't reset if the pressures are incorrect.
2. Drive the Vehicle: Drive the vehicle for at least 10-20 minutes at speeds above 20 mph (32 km/h). This allows the sensors to transmit data to the vehicle's computer.
3. Check the Tire Pressure Monitoring System (TPMS) Light: After driving, the TPMS warning light should turn off automatically if the tire pressures are correct and the system has successfully re-learned the new pressures.
If the light stays on after driving:
* Check Tire Pressure Again: Double-check your tire pressure with a reliable gauge. Even a small discrepancy can trigger the light.
* Inspect for Problems: Look for any obvious issues like slow leaks or damaged sensors.
* Use a TPMS Tool (Optional): A TPMS tool (often available at auto parts stores) can be used to re-learn the sensor IDs. This is typically needed if you've replaced sensors, had tire rotations or repairs, or if the system has become confused. However, for a simple pressure adjustment, it's usually unnecessary.
* Visit a Mechanic: If none of the above solves the problem, it's best to take your vehicle to a mechanic or tire shop. There might be a faulty sensor or a problem with the TPMS system itself.
Important Note: The 2007 Ford Escape's TPMS is a direct TPMS system. This means there's no indirect pressure measurement, unlike some systems that estimate pressure based on wheel speed sensors. You *must* have properly inflated tires for the system to reset.
