Here's how to do it:
1. Inflate tires: Inflate all four tires to the recommended pressure listed on the sticker located on the driver's side doorjamb (or in your owner's manual). Don't forget the spare.
2. Drive: Drive the vehicle for about 10-20 minutes at speeds above 20 mph. This allows the system to recalibrate.
3. Check the system: After driving, the TPMS light should turn off if the tires are properly inflated. If the light remains on after driving and properly inflating, there's likely a problem with a sensor or the system itself. You may need a tire pressure sensor relearn procedure performed by a mechanic.
Important Considerations:
* Low tire pressure: If a light remains on, it could also indicate a leak or consistently low tire pressure in one or more tires. Check each tire's pressure individually to rule out a leak.
* Sensor malfunction: A faulty sensor will require professional attention. A mechanic can diagnose which sensor is failing.
* Owner's manual: Always refer to your owner's manual for the most accurate and detailed instructions specific to your vehicle.
If you've followed these steps and the light remains on, it's best to consult a mechanic to troubleshoot the TPMS system.
