Auto >> AutoSPT >  >> Auto Repair

How do you change the old metal wiper blade on a 1991 buick skylark?

Replacing wiper blades on a 1991 Buick Skylark (or any car for that matter) generally involves the following steps. However, always consult your owner's manual first as there might be specific instructions or nuances for your Skylark model.

Tools You Might Need:

* New wiper blades (make sure to get the correct size for your Skylark. Check your owner's manual or the old blades for this information.)

Steps:

1. Lift the wiper arm: With the ignition off, lift the wiper arm away from the windshield. Sometimes it helps to gently pull it slightly outward before lifting to overcome any tension. Be careful; it’s metal and can be heavy.

2. Locate the connection: At the base of the wiper arm, you'll see a connection mechanism holding the old blade to the arm. This is usually either a:

* Hook: A simple hook that holds the blade in place. You might need to push a small tab or lever to release the hook.

* Push-button or clip: Some systems use a small button or clip that needs to be pressed or pushed to release the blade.

* Nut and bolt: Less common on wiper blades, but possible - you'll need a wrench in this case.

3. Remove the old blade: Once you've identified the connection type, carefully release it and remove the old wiper blade.

4. Install the new blade: Align the new wiper blade with the wiper arm connection, ensuring it's securely seated. Push or snap it into place until you hear/feel it click. It should feel snug and firmly attached.

5. Lower the wiper arm: Gently lower the wiper arm back onto the windshield.

6. Repeat for the other side: Repeat steps 1-5 for the passenger-side wiper blade.

Important Considerations:

* Be gentle: Avoid forcing anything. If you're having trouble, consult a diagram or video for your specific wiper blade type.

* Check for corrosion: The connection points might be corroded, making removal difficult. A little penetrating oil (like WD-40) might help loosen things up.

* Blade size: Ensure you buy the correctly sized wiper blades. The packaging usually specifies the length and common vehicle applications.

* Safety: Always be mindful of your fingers while handling the wiper arms and blades.

If you're unsure about any step, it's always best to watch a YouTube video demonstrating wiper blade replacement for a similar vehicle. Search for "how to replace wiper blades 1991 Buick Skylark" or a similar term. This will provide a visual guide that may be easier to follow than just a written description.