Here's how to reset the oil life monitor on most Ford Escape XLT models (the exact steps might vary slightly depending on the year and infotainment system):
1. Turn the ignition to the "ON" position (without starting the engine).
2. Locate the oil life monitor. This is usually accessible through the vehicle's information display, often accessed via buttons on the steering wheel or a dedicated button on the center console. Look for something that shows a percentage or mileage until the next oil change.
3. Navigate to the oil life reset menu. The exact steps for this will depend on your specific Escape's infotainment system. You'll likely need to use the steering wheel controls to cycle through menus until you find the "Settings," "Maintenance," or similar menu. Consult your owner's manual for detailed instructions specific to your vehicle's year and model.
4. Reset the oil life monitor. Once you find the correct menu, you should see an option to reset the oil life percentage. This might involve holding down a button, pressing a specific sequence of buttons, or confirming a prompt on the screen. Again, refer to your owner's manual for the exact procedure.
Important Note: The owner's manual is crucial here. Ford's infotainment systems vary somewhat between model years, and the steps to access and reset the oil life monitor can differ. Do not attempt to reset anything you are not familiar with based on online instructions; stick to your owner's manual for the most accurate and safe method.
If you're still having trouble, consult your Ford dealership or a qualified mechanic. They can help you reset the oil life monitor and ensure everything was done correctly during the oil change.
