Tools You'll Likely Need:
* Socket set (metric): Various sizes, including those for the door panel screws.
* Screwdrivers (Phillips and flathead): Different sizes again.
* Panel removal tools: These help prevent scratching the interior trim.
* Pliers: Needle-nose pliers might be helpful.
* New window regulator motor: Ensure you get the correct one for your door (driver's side, passenger's side).
* Possibly a ratchet and extension: To reach certain fasteners.
Steps (General - Consult your repair manual for specifics):
1. Disconnect the battery: This is crucial to prevent accidental short circuits.
2. Remove the interior door panel: This varies slightly depending on the door, but generally involves:
* Removing the screws holding the door panel in place (often hidden under armrests, handles, and around the edges).
* Carefully unclipping the panel from the door. There are usually plastic clips; gently pry them loose with panel removal tools to avoid breakage. Be aware of wiring harnesses connected to the panel (power window switches, courtesy lights, etc.).
3. Disconnect the window motor connector: Locate the electrical connector going to the window regulator motor. Carefully unplug it.
4. Remove the window regulator assembly: This is often the most challenging part. You'll likely need to:
* Remove screws and bolts holding the regulator assembly to the door.
* Possibly detach the window from the regulator mechanism. This might involve removing clips or fasteners that hold the window to the regulator. Be cautious, as the window glass can be heavy. Support the glass as you work to prevent it from falling and breaking.
5. Replace the window motor: Once the regulator assembly is out, locate the faulty motor. It might be attached with screws or clips. Replace it with the new motor, ensuring it's properly seated and connected.
6. Reassemble everything: Carefully reverse the steps above, ensuring all screws, bolts, and clips are properly fastened. Make sure the window operates smoothly.
7. Reconnect the battery: Test the power window function.
Important Considerations:
* Window glass support: Always support the window glass to prevent damage or injury.
* Wiring harness: Be careful not to damage any wiring during disassembly and reassembly.
* Clips and fasteners: Keep track of all the screws, clips, and fasteners. Many are specific and easily lost.
* Repair manual: This cannot replace a proper repair manual; use one specifically for your 1994 Ford Explorer. Pictures and detailed instructions are invaluable.
This is a simplified overview. The exact procedure can differ significantly. A repair manual is essential for successfully completing this repair. If you're uncomfortable with automotive repairs, it's best to take your Explorer to a qualified mechanic. Improper repair could result in damage to your vehicle or personal injury.
