Honda cars with push-button starts have a steering wheel that locks when the engine is off. This is to prevent someone from driving off with the car while it’s not running. If you need to move your Honda car with the push-button start and the steering wheel is locked, there is a way to unlock it.
To unlock the steering wheel on a Honda with a push-button start, you’ll need the key fob for the car. With the key fob in your hand, press and hold the unlock button until the horn beeps.
This will release the steering wheel lock. Once it’s unlocked, you can turn the wheel to move the car.
The Honda steering wheel lock is a safety feature that is activated when the engine is turned off. When you turn the key to the “off” position, the car’s computer sends a signal to the powertrain control module (PCM), which in turn tells the ignition switch to disable all electrical current.
This includes power going to the starter motor, which is what you need to start the car.
The steering wheel lock is meant to prevent someone from driving your car away without the key. However, if you have the key and try to start the car, but the steering wheel is locked, it can be very frustrating.
The common cause for the steering wheel to lock up and not work is because the battery in the key fob has died. When this happens, you will still be able to use the mechanical key to unlock the driver’s door, but the push-button start will not work.
The other reason would be if the car battery has died. If this is the case, you will not be able to start the car at all, no matter what type of key fob you have. But you can replace the battery or request someone to help you jumpstart the car.
In case your key fob is not working and you can’t unlock the steering wheel, there is a way to override the system. All you need is a flathead screwdriver. Look for the small slot on the underside of the steering column cover.
Insert the screwdriver into this slot and push up. This will release the steering wheel lock. Once the steering wheel is unlocked, you can start the car by turning the key in the ignition. Remember to keep the screwdriver with you in case the steering wheel locks again – you will need it to unlock it.
The Honda steering wheel lock is a safety feature that is activated when the key fob is not detected. This may happen if the key fob is lost or damaged, or if it’s out of range. When the system senses that the key fob is not present, it will automatically activate the steering wheel lock.
When the lock is activated, the steering wheel will not turn and the car will not start. This is to prevent someone from driving off with the car without the key fob.
The Honda steering wheel lock can be unlocked with the key fob or by using a flathead screwdriver. If you have the key fob, just press and hold the unlock button until the horn beeps to release the lock.
If you don’t have the key fob, you can use a screwdriver to override the system and unlock the steering wheel. Just insert the screwdriver into the small slot on the underside of the steering column cover and push up to release the lock.
Once the steering wheel is unlocked, you can start the car by turning the key in the ignition.
The steering lock is electronic so if your battery is dead, you will not be able to unlock the wheel. If this happens, you’ll need to call a tow truck or have the car towed to a Honda dealership.
Alternatively, if you have jumpers, you can try to jump-start the car. Once the battery is charged, you will be able to unlock the steering wheel and start the car.
To use the jumpers, find the positive and negative terminals on the battery. The positive terminal is usually red and the negative terminal is usually black.
Connect the jumper cables to these terminals and make sure that both clamps are making good contact. Now start the car by turning the key in the ignition.
Once the car is running, remove the jumper cables in reverse order. First, remove the clamp from the negative terminal and then from the positive terminal.
The best way to prevent the steering wheel from locking is to keep the key fob with you at all times. If you leave it in the car, make sure that it’s within range of the key fob sensor.
If you lose your key fob, you can call Honda and order a replacement. You will need to provide your car’s make, model, and VIN number. The replacement key fob will cost $100 plus shipping and handling.
You can also buy a universal key fob that will work with your car. These key fobs are less expensive than the Honda key fob and can be programmed to work with your car.
In case your key fob isn’t working and you can’t unlock the steering wheel, there is a workaround. All you need is a flathead screwdriver. Look for a tiny slot on the underside of the steering column cover.
Insert the screwdriver into this hole and push up to release the steering wheel lock. After the wheel is unlocked, turn the key in the ignition to start the car.
So, how can you release the steering lock? Easy: Insert a screwdriver between the plastic cover on the steering column and the steering wheel. Pry off the cover with force from your hand or a breaker bar. Because the plastic cover may break, keep in mind that replacement may be required.
The cost to fix power steering can vary depending on the problem. A common issue is a power steering fluid leak. This can be fixed by topping off the fluid or, in some cases, replacing a seal.
The average cost to repair a power steering pump ranges from $200 to $350. The cost of replacing the power steering pump with a new component is between $400 and $800.
Yes, you can bypass the ignition switch. This is an easy process and can be done with a few household tools. First, remove the steering wheel cover by prying it off with a screwdriver. Once the cover is removed, you will see the ignition switch.
Disconnect the wiring harness from the back of the switch and then remove the switch from the column.
Now, take the new switch and connect the wiring harness to the back of it. Install the new switch in the steering column and reattach the cover. Finally, start the car by turning the key in the ignition.
There are a few different ways to unlock the steering wheel if it becomes locked. First, insert a screwdriver into the tiny slot on the underside of the steering column cover and push up to release the steering wheel lock. Once the wheel is unlocked, turn the key in the ignition to start the car.
If replacing the system, the cost to fix power steering can vary depending on the problem, but it’s typically not very expensive. You can bypass the ignition switch if necessary.
To do this, remove the steering wheel cover and disconnect the wiring harness from the back of the ignition switch. Install a new switch in the column and reattach the cover.
You may enjoy these related articles:
How To Reset The Maintenance Light On The Honda Accord
How To Reset The Honda Odyssey Oil Light
How To Check And Reset The TPMS System Honda Civic 2012
