1. Get the Activation Code: You'll need the correct activation code (also called a disarm code) to turn off the alarm. This code should be provided in the owner's manual or the vehicle documentation.
2. Access the Driver's Door: Sit inside the vehicle and make sure all the doors are closed. Insert the key into the driver's side door lock cylinder.
3. Turn the Key: Turn the key clockwise to the "ON" position (not the "START" position) and hold it there for about 5-7 seconds.
4. Input the Code: While holding the key in the "ON" position, press the numbered buttons on the door panel to enter the activation code. Refer to your owner's manual for the specific sequence of button presses.
5. Release the Key: Once you've successfully entered the code, release the key from the "ON" position.
6. Alarm Deactivation: You should hear the alarm disarm, indicated by a chime or a blinking LED light. The alarm system should be disabled now.
If the alarm doesn't disarm after following these steps, you may have entered the code incorrectly or there might be an issue with the alarm system itself. In that case, consult with your vehicle's owner's manual or seek assistance from a certified mechanic or a dealership.
