1. Gather tools and materials:
* New wheel bearing
* Socket set
* Wrench set
* Jack and jack stands
* Pry bar
* Hammer
2. Park the vehicle on level ground and apply parking brake.
3. Remove the lug nuts on the front wheel.
4. Jack up the vehicle and place jack stands under the frame.
5. Use the pry bar to pry the front wheel from the hub.
6. Use the wrench to remove the hub nut.
7. Use the pry bar to pry the hub off the wheel bearing.
8. Inspect the wheel bearing for any signs of damage or wear.
9. Replace the wheel bearing with the new one.
10. Reinstall the hub and tighten the hub nut.
11. Reinstall the front wheel and tighten the lug nuts.
12. Lower the vehicle and remove the jack stands.
13. Test drive the vehicle to ensure the wheel bearing is properly installed and functioning properly.
Note: These instructions do not cover the repair or replacement of other parts (such as the wheel hub or axle) that may be associated with the front wheel bearing. The specific steps may vary depending on your car's model and trim. If you are not comfortable performing this repair, it is recommended that you take your car to a qualified mechanic.
