1. Locate the tension pulley. The tension pulley is located on the front of the engine, near the top. It is a small, round pulley with a spring-loaded arm.
2. Loosen the lock nut. The lock nut is located on the side of the tension pulley. Use a wrench to loosen the lock nut.
3. Turn the tension pulley. Use a wrench to turn the tension pulley clockwise until the belt is tight.
4. Tighten the lock nut. Use a wrench to tighten the lock nut.
5. Check the belt tension. The belt tension should be firm, but not too tight. If the belt is too tight, it can damage the engine. If the belt is too loose, it can slip and cause the engine to overheat.
Here are some additional tips for adjusting the tension pulley on a 2000 Dodge Dakota:
* Be sure to use the correct tools. A wrench that is too small or too large can damage the tension pulley.
* Do not overtighten the lock nut. This can damage the tension pulley.
* Check the belt tension regularly. The belt tension can change over time, so it is important to check it regularly and adjust it as necessary.
