1. Turn the ignition key to the "ON" position, but do not start the engine.
2. Find the ABS diagnostic connector under the dashboard, usually near the driver's side footwell.
3. Connect a jumper wire between the ABS diagnostic connector pins 4 and 9.
4. Turn the ignition key to the "OFF" position.
5. Wait for 10 seconds, then turn the ignition key back to the "ON" position.
6. The ABS light should now be reset and should turn off.
If the ABS light does not turn off, there may be a problem with the ABS system that requires further diagnosis and repair.
