1. Park your vehicle in a safe and well-lit area: Engage the parking brake and turn off the engine.
2. Locate the license lamp: The license plate lamp is located on the underside of the trunk. There will be a small lens that needs to be removed.
3. Remove the lens cover: To access the license lamp bulb, you need to remove the lens cover. This can usually be done by gently prying it off or unscrewing it.
4. Remove the old bulb: Once you have removed the lens cover, you will see the license lamp bulb. Gently turn counterclockwise to remove the old bulb.
5. Install the new bulb: Take the new license lamp bulb and insert it into the socket. Gently turn clockwise until the bulb is secure.
6. Replace the lens cover: Put the lens cover back in place and make sure it is properly secured.
7. Test the light: Turn the lights on and check if the license lamp bulb is working properly.
Note: Be sure to use the correct type of replacement bulb specified in your vehicle's owner's manual.
