1. Turn off the vehicle and allow it to cool down.
2. Locate the license plate light housings on the rear of the vehicle. They are typically on either side of the license plate.
3. Using a flat-head screwdriver or other suitable tool, pry open the lens cover on the license plate light housing.
4. Once the lens cover is removed, you will see the light bulb.
5. Turn the light bulb counterclockwise to remove it from the socket.
6. Install the new light bulb in the socket by turning it clockwise until it is secure.
7. Replace the lens cover and close it securely.
8. Turn on the lights to test the new light bulb.
Here are some additional tips for changing the license plate light on a Toyota T100:
* Be careful not to damage the lens cover when prying it open.
* If the light bulb is difficult to turn, you can try using a pair of pliers to gently grip the bulb and turn it.
* Make sure that the new light bulb is the same type and wattage as the original bulb.
* If you have any questions or concerns, consult the owner's manual for your vehicle.
