1. Park your Tacoma in a safe and well-lit area, and turn off the engine.
2. Open the hood of your Tacoma.
3. Locate the parking light assembly on the left side of the vehicle. It is usually located near the headlight.
4. Remove the two screws that hold the parking light assembly in place.
5. Remove the parking light assembly from the vehicle.
6. Disconnect the electrical connector from the parking light assembly.
7. Remove the old parking light bulb from the assembly.
8. Install the new parking light bulb into the assembly.
9. Reconnect the electrical connector to the parking light assembly.
10. Reinstall the parking light assembly onto the vehicle.
11. Secure the parking light assembly with the two screws that you removed earlier.
12. Close the hood of your Tacoma.
Note: If you have difficulty accessing the parking light assembly, you may need to remove the wheel well liner to gain more space.
