1. Make sure the vehicle is parked in a safe location and the engine is turned off.
2. Locate the OBD-II port beneath the dashboard, driver’s side. It is usually a 16-pin connector covered by a plastic cover.
3. Connect a compatible OBD-II scanner to the port.
4. Turn the key to the “ON” position without starting the engine.
5. Follow the instructions on the scanner to access the vehicle’s diagnostic menu.
6. Once in the diagnostic menu, navigate to the option to clear or reset the ABS light or the VLC warning light.
7. Select the reset option and follow any additional instructions provided by the scanner.
8. Once the reset is complete, turn the key to the “OFF” position and disconnect the scanner.
9. Start the engine and verify that the ABS light and the VLC warning light are no longer illuminated.
10. If the lights remain on, repeat the process or refer to the vehicle’s owner’s manual for further instructions or seek assistance from a qualified automotive technician.
NOTE: The reset procedure may vary slightly depending on the OBD-II scanner used and the specific model year and configuration of your Nissan Xterra. If you are unable to reset the lights using the steps above, consult the vehicle’s service manual or contact a Nissan dealership or a qualified automotive repair facility for assistance.
