- Philips screwdriver
- Flathead screwdriver
- New turn signal bulb
Instructions
1. Park your car in a safe location and turn off the engine.
2. Open the hood.
3. Locate the turn signal bulb assembly. It is located in the front of the vehicle, on the side that you wish to replace.
4. Use the Philips screwdriver to remove the screws that hold the turn signal bulb assembly in place.
5. Once the screws are removed, gently pry the turn signal bulb assembly out of the housing.
6. Use the flathead screwdriver to gently pry the old turn signal bulb out of the socket.
7. Insert the new turn signal bulb into the socket. Ensure that the bulb is seated properly and is not making contact with any metallic surfaces.
8. Reinstall the turn signal bulb assembly in the housing, ensuring that the screws are tightened securely.
9. Close the hood of your vehicle.
Now that you have installed the new turn signal bulb, check to ensure that it is working properly. This process takes mere minutes and can save you some money on repair costs.
