1. Open the Hood: Pop the hood of your 1990 Chevy Caprice. Locate the headlight assembly you want to remove the trim ring from.
2. Identify the Retaining Clips: On the backside of the headlight assembly, where the trim ring meets the headlight bezel, you'll find several metal retaining clips that secure the trim ring in place. These clips have a hook-like shape.
3. Use a Flathead Screwdriver: Take a flathead screwdriver and carefully insert it between the retaining clip and the trim ring. Pry the screwdriver slightly to release the clip from its hook. Continue this process around the entire headlight assembly, releasing each retaining clip one by one.
4. Remove the Trim Ring: Once all the retaining clips are released, you can gently pull the trim ring away from the headlight assembly. There might be some slight resistance due to the seal around the headlight, but it should come off easily.
5. Replace the Trim Ring (Optional): If you're replacing the trim ring, align the new one with the headlight assembly, making sure it sits evenly inside the headlight bezel.
6. Reinstall the Retaining Clips: Press each retaining clip back into place, ensuring it engages properly with the trim ring. Make sure all the clips are secure to hold the trim ring firmly in place.
7. Close the Hood: Once you've installed or replaced the trim ring and secured it with the retaining clips, you can close the hood of your 1990 Chevy Caprice.
Remember to work carefully when prying off the retaining clips to avoid damaging the trim ring or the headlight assembly. It's a relatively simple DIY task that should take a few minutes to complete.
