1. Park your car on a level surface. This will help to ensure that the coolant is evenly distributed throughout the system.
2. Turn off the engine and allow it to cool down. This will help to prevent any damage to the engine or cooling system.
3. Open the hood of your car.
4. Locate the coolant reservoir. It is typically a clear plastic container with a black cap.
5. Remove the cap of the coolant reservoir. Be careful as the coolant may be hot.
6. Add coolant to the reservoir until it is full. Use a funnel to avoid spilling any coolant.
7. Replace the cap of the coolant reservoir.
8. Start the engine and allow it to run for a few minutes. This will help to circulate the coolant throughout the system and remove any air pockets.
9. Turn off the engine and allow it to cool down.
10. Check the coolant level in the reservoir again. If it is low, add more coolant until it is full.
11. Repeat steps 8-10 until the coolant level remains consistent.
If you are unable to remove the air lock from the heating system, you may need to take your car to a mechanic for further assistance.
