1. Gather the necessary materials. You will need:
* New wiper blades (2)
* A flat-head screwdriver or a pair of pliers
* A clean cloth
2. Turn off the wipers and open the hood.
3. Locate the wiper blade assemblies. They are located on the front of the car, just above the windshield.
4. Release the wiper blade from the wiper arm. Use the flat-head screwdriver or pliers to pry up the small tab that is holding the wiper blade in place.
5. Remove the old wiper blade. Pull the wiper blade straight up and off of the wiper arm.
6. Clean the wiper arm. Use the clean cloth to wipe off any dirt or debris from the wiper arm.
7. Install the new wiper blade. Slide the new wiper blade onto the wiper arm, making sure that the tab locks into place.
8. Repeat steps 4-7 for the other wiper blade.
9. Close the hood and turn on the wipers. Test the new wiper blades to make sure that they are working properly.
