* Socket set
* Screwdriver
* Pliers
Materials
* Alternator
* Serpentine belt
* 14 mm bolt
* 15 mm bolt
* 17 mm bolt
Instructions
1. Disconnect the negative battery terminal.
2. Remove the serpentine belt.
3. Remove the 14 mm bolts holding the alternator in place.
4. Remove the 15 mm bolt holding the alternator bracket in place.
5. Remove the 17 mm bolt holding the ground cable to the alternator.
6. Remove the alternator from the vehicle.
7. Install the new alternator in reverse order of removal.
8. Reconnect the negative battery terminal.
9. Start the vehicle and check for leaks.
