To fix this problem, you will need to troubleshoot the electrical circuit between the ignition switch and the starter solenoid. This may involve checking the ignition switch, the wiring, and the solenoid itself. If you are not comfortable doing this yourself, you should take your car to a mechanic.
Here are some tips for troubleshooting the electrical circuit between the ignition switch and the starter solenoid:
* Check the ignition switch. Turn the key to the "ON" position and see if the dash lights come on. If the dash lights do not come on, it means that the ignition switch is not working properly.
* Check the wiring. Look for any broken or damaged wires between the ignition switch and the starter solenoid. If you find any broken or damaged wires, you will need to repair them.
* Check the solenoid. Test the solenoid by connecting a jumper wire between the positive terminal of the battery and the "S" terminal on the solenoid. If the solenoid clicks, it is working properly.
If you cannot find any problems with the ignition switch, the wiring, or the solenoid, you may need to replace the starter relay. The starter relay is a small electrical switch that is located near the starter solenoid. It is responsible for sending power from the battery to the starter solenoid. If there are issues with your starter relay, it will likely need to be replaced in order for your car to start normally without jumper assistance.
