1. Preparation:
- Ensure the vehicle is in a safe and level position.
- Turn off the engine and allow it to cool down.
- Apply the parking brake.
- Disconnect the battery's negative terminal to prevent accidental electrical shock.
2. Locate the Seat Spring:
- Slide the driver's seat fully back to provide better access.
- Use a flashlight to inspect the underside of the seat to find the spring's location. It's usually held by bolts or screws.
3. Remove the Old Spring:
- Use a wrench or screwdriver to loosen and remove the bolts or screws holding the spring in place.
- Gently lift the old spring out of its housing.
4. Install the New Spring:
- Position the new spring in its housing, ensuring it sits properly.
- Replace the bolts or screws you removed earlier and tighten them securely.
5. Test the Seat:
- Carefully sit on the driver's seat to check for proper functionality and support. Ensure that the seat adjusts and moves smoothly.
6. Reattach the Battery:
- Reconnect the battery's negative terminal.
7. Test Drive:
- Take the vehicle for a brief test drive to ensure the seat operates correctly and provides adequate support during braking and acceleration.
8. Safety First:
- Always prioritize safety during car repairs. If you're uncomfortable performing this task, consider seeking professional assistance from a mechanic.
- Make sure the vehicle is supported and stable before crawling underneath it.
Remember that specific Skoda models may have slight variations in procedures and spring mechanisms, so consult the vehicle's service manual or reliable online guides to ensure accuracy for your specific model.
