- Phillips-head screwdriver
- Flat-head screwdriver
- New right front turn marker
Instructions:
1. Park your vehicle on a level surface and turn off the engine. Engage the parking brake.
2. Open the hood of your vehicle. Locate the right front turn marker. It is located in the front corner of the vehicle, just below the headlight.
3. Use a flat-head screwdriver to pry the turn signal lens off of the housing. Be careful not to damage the lens or the housing.
4. Once the lens is removed, locate the turn signal bulb socket. It is a black plastic socket that is located behind the lens.
5. Turn the bulb socket counterclockwise to remove it from the housing. Be careful not to drop the bulb.
6. Remove the old turn signal bulb from the socket.
7. Insert the new turn signal bulb into the socket.
8. Turn the bulb socket clockwise to secure it in place.
9. Reattach the turn signal lens to the housing. Make sure that the lens is seated properly and that there are no gaps.
10. Close the hood of your vehicle and test the new turn marker to ensure that it is working properly.
