- Torx T30 screwdriver
Instructions:
1. Remove the two Torx T30 screws at the bottom of the passenger seat.
2. Gently pull up on the front of the seat to remove it from the rails.
3. Disconnect the electrical connectors under the seat.
4. Remove the four nuts holding the seat recline mechanism in place.
5. Remove the seat recline mechanism.
6. Replace the seat recline mechanism.
7. Reattach the nuts holding the seat recline mechanism in place.
8. Reconnect the electrical connectors under the seat.
9. Slide the seat back onto the rails and secure it with the two Torx T30 screws.
Your Mini cooper passenger seat should now adjust properly.
