Auto >> AutoSPT >  >> Auto Repair

How do you clean Harley Davidson speed sensor on a 1996 Heritage Softail?

To clean the Harley Davidson speed sensor on a 1996 Heritage Softail, follow these steps:

1. Locate the speed sensor. The speed sensor is located on the left side of the transmission, just behind the front belt pulley.

2. Remove the bolt that holds the sensor in place.

3. Pull the sensor out of its housing.

4. Clean the sensor with a mild detergent and water. Be sure to dry the sensor thoroughly before reinstalling it.

5. Reinstall the sensor in its housing and tighten the bolt.

Here are some additional tips for cleaning the Harley Davidson speed sensor:

* Use a soft cloth to clean the sensor. Avoid using anything that could damage the sensor, such as a wire brush or steel wool.

* Be careful not to get water inside the sensor. If water does get inside the sensor, it could damage the sensor and cause it to malfunction.

* If the sensor is damaged, it will need to be replaced.

Auto Repair
Keeping a Cool Car this Summer How do you fix door latch on 2005 dodge ram?
Car Care
Control Arm Replacement Guide How to Dispose Your Motor Oil? Oil Recycling Tips! Are Your BMW’s Tires Prepared For Winter?
Engine
Where is the blend door on a 2000 Dodge Durango? What do people use the steam engine for?
Electric Car
Where is the fuel filter on a 1992 Buick Century? How do you fix code P0705 transmission range sensor switch circuit malfunction PRNDLinput in Hyundai Sonata? Will a 1997 Dodge Ram pickup rear end fit 2003 1500?
Autopilot
How fast does mini dirt bike go 50cc thanks? How do you set the clock in a 2012 Nissan Altima?
Car Photos
Location of fuse panel for 1987 Lincoln town car? Where is the oil filter on a Ford Laser gl kh sedan? What rear axle does a 1964 ford F100 Truck have?