Tools and Materials Needed:
- New Harley Davidson Kickstand
- Socket wrench set (including sizes needed for your specific bike)
- Rags
- Penetrating oil (optional)
Steps:
1. Park the motorcycle in a safe location and turn off the engine.
2. Secure the bike with the sidestand or a motorcycle lift to keep it upright and stable.
3. Locate the kickstand assembly on your Harley-Davidson motorcycle.
4. Place a rag or protective material underneath the kickstand area to prevent any damage or loss of small parts during removal.
5. Use the appropriate socket wrench to loosen and remove the bolts or nuts securing the kickstand to the frame.
6. Once loosened, remove the kickstand carefully.
7. (Optional) Apply a small amount of penetrating oil to any threads or pivot points that might be corroded or stuck.
8. Align the new kickstand with the mounting bracket and insert the bolts or nuts that were removed earlier.
9. Tighten the bolts or nuts securely to the recommended torque specifications for your motorcycle.
10. Check that the kickstand is properly aligned, deployed smoothly, and retracts securely without obstruction or looseness.
11. Make any adjustments or tightenings if necessary.
It is important to consult the specific service manual or documentation provided by Harley-Davidson for your motorcycle model to ensure proper installation and safety. If you are not comfortable or experienced with motorcycle repair, it may be best to seek assistance from a professional motorcycle mechanic or repair shop.
