1. Loosen the handlebar clamps: There are two handlebar clamps, one on each side of the handlebars. Loosen the bolts that hold the clamps in place, using a Torx wrench.
2. Adjust the handlebars to the desired position: Once the clamps are loose, you can move the handlebars to the desired position. There are notches on the risers that the handlebars can be positioned in.
3. Tighten the handlebar clamps: Once the handlebars are in the desired position, tighten the handlebar clamps. Be sure to tighten the bolts evenly on both sides.
Here are some additional tips for adjusting the handlebars on a Harley-Davidson Ultra Classic:
* Make sure that the handlebars are level and centered before tightening the clamps.
* Tighten the clamps securely to avoid the handlebars from moving out of position.
* If you have any questions about adjusting the handlebars, consult your motorcycle's owner's manual or a qualified mechanic.
