- Check the fuel line for any kinks or blockages
- Verify sufficient fuel is in the tank
- Clean and inspect the fuel filter
- Ensure no water is in the fuel tank or fuel lines
- Check the fuel cap to ensure it is venting properly
Verify the spark plug
- Remove the spark plug and inspect for damage or fouling.
- Make sure the spark plug gap is set within specifications.
- Ensure the spark plug wire is properly connected.
Inspect the Air Filter
- Check the air filter and ensure it's clean and free from debris or blockages.
Clean the carburetor
- Remove the carburetor, disassemble it and clean all components.
- Ensure no sediment or blockages are present in the jets or passages.
Check the throttle cable
- Ensure the throttle cable is properly adjusted and not binding.
- Verify the throttle cable moves smoothly when the throttle is twisted.
Check the exhaust system
- Make sure the exhaust pipe and muffler are free from restrictions or blockages.
