1. Park your bike on a flat surface. Make sure the bike is in gear and the parking brake is on.
2. Locate the center stand adjustment bolt. The center stand adjustment bolt is located on the left side of the bike, just below the footpeg.
3. Use a wrench to loosen the center stand adjustment bolt. Turn the bolt counterclockwise until it is loose enough to move.
4. Move the center stand up or down as needed. If the center stand is rubbing the chain, move it down. If the center stand is not touching the chain, move it up.
5. Tighten the center stand adjustment bolt. Once the center stand is in the desired position, tighten the center stand adjustment bolt.
6. Test the center stand. Put the bike in gear and release the parking brake. Slowly move the bike back and forth to make sure the center stand does not rub the chain.
Here are some additional tips for adjusting the center stand on a Honda CT-110:
- Make sure the rear wheel is aligned properly before you adjust the center stand.
- If you have a chain guard, make sure it is properly installed before you adjust the center stand.
- Do not over-tighten the center stand adjustment bolt. This can damage the bolt or the frame of the bike.
