To slow the idle of a 1995 Harley-Davidson motorcycle, you will need to adjust the idle speed screw. This screw is located on the left side of the carburetor. To access it, you will need to remove the air cleaner cover. Once you have located the idle speed screw, turn it clockwise to slow down the idle speed. You can also adjust the idle speed by turning the throttle stop screw. This screw is located on the right side of the carburetor. To access it, you will need to remove the throttle cable cover. Once you have located the throttle stop screw, turn it counterclockwise to slow down the idle speed.
Here are the step-by-step instructions on how to slow the idle of a 1995 Harley:
1. Put on eye protection.
2. Remove the air cleaner cover.
3. Locate the idle speed screw on the left side of the carburetor.
4. Turn the idle speed screw clockwise to slow down the idle speed.
5. Replace the air cleaner cover.
6. Start the motorcycle and let it warm up for a few minutes.
7. Check the idle speed. It should be between 850 and 950 RPM.
8. If necessary, repeat steps 3 and 4 until the desired idle speed is achieved.
