- Flat blade screwdriver
- Phillips-head screwdriver
- Safety glasses
- Pliers
Instructions:
1. Park your motorcycle on a level surface and turn off the engine. Allow the engine to cool down completely.
2. Put on your safety glasses to protect your eyes from flying debris.
3. Use the flat-blade screwdriver to pry off the chrome covers on the ends of the handlebars.
4. Remove the Phillips-head screws holding the handlebar grips in place.
5. Use the pliers to gently pry the handlebar grips off of the handlebars.
Tips:
- If the handlebar grips are difficult to remove, you can use a hairdryer or heat gun to soften the glue holding them in place.
- Be careful not to damage the handlebars when prying off the handlebar grips.
- You may need to use a penetrating lubricant to loosen the Phillips-head screws if they are rusted.
