1. Gather the necessary tools and materials:
- New transmission fluid
- Oil drain pan
- Funnel
- Wrench
- Rags
2. Prepare the motorcycle:
- Place the motorcycle on the center stand.
- Start the motorcycle and let it run for a few minutes to warm up the transmission fluid.
- Turn off the motorcycle and let it cool down for a few minutes.
3. Locate the transmission drain plug:
- On the bottom of the transmission, you will find a drain plug.
4. Drain the transmission fluid:
- Place the oil drain pan under the drain plug.
- Use the wrench to loosen the drain plug.
- Allow the transmission fluid to drain completely.
5. Replace the drain plug:
- Once the transmission fluid has drained, replace the drain plug and tighten it securely.
6. Locate the transmission fill plug:
- On the side of the transmission, you will find a fill plug.
- Remove the fill plug.
7. Add new transmission fluid:
- Use the funnel to add new transmission fluid to the transmission. Add the amount of fluid recommended in your motorcycle's owner's manual.
8. Replace the fill plug:
- Once you have added the correct amount of transmission fluid, replace the fill plug and tighten it securely.
9. Start the motorcycle and check for leaks:
- Start the motorcycle and let it run for a few minutes. Check for any leaks around the drain plug and fill plug. If you see any leaks, tighten the plugs until the leaks stop.
