Auto >> AutoSPT >  >> Auto Repair

How do you get a 1986 Yamaha moto-4 out of reverse stuck and the gear shift go into any gear?

1. Turn off the engine and put the motorcycle in neutral. This will help to prevent the motorcycle from rolling while you are trying to shift gears.

2. Locate the shift lever. The shift lever is usually located on the left side of the motorcycle, near the footpeg.

3. Try to move the shift lever into another gear. If the shift lever is stuck in reverse, you may need to use some force to move it.

4. If you are unable to move the shift lever, try rocking the motorcycle back and forth while applying pressure to the shift lever. This may help to loosen the shift lever and allow you to move it into another gear.

5. If you are still unable to move the shift lever, you may need to remove the clutch cover and inspect the shift mechanism. This is a more difficult repair, and it is best to be performed by a qualified mechanic.

Here are some additional tips that may help you to get your motorcycle out of reverse:

* Try shifting gears with the engine off. This may make it easier to move the shift lever.

* Try shifting gears while the motorcycle is in motion. This may also help to loosen the shift lever.

* If you are unable to shift gears, do not force the shift lever. This could damage the shift mechanism.

If you are unable to get your motorcycle out of reverse, you should take it to a qualified mechanic.