* A Phillips head screwdriver
* A flathead screwdriver
* A small pry bar
_Instructions:_
1. Locate the two Phillips head screws that are located at the rear of the seat.
2. Use the Phillips head screwdriver to remove the two screws.
3. Locate the two small plastic tabs that are located on the rear of the seat, just below the screws you just removed.
4. Use the flathead screwdriver to carefully pry up the two plastic tabs.
5. Carefully lift the seat up and off of the motorcycle.
*Please note that instructions may vary, consult with the Motorcycle user/ maintenance manual*
