Tools Needed:
• Jack and jack stands
• Car ramps or a lift
• 17mm wrench or socket
• 10mm wrench or socket
• Crowbar or pry bar
• Flashlight
Instructions:
Step 1: Park the car in a safe and stable area. Engage the parking brake.
Step 2: Lift the vehicle off the ground. Jack up the vehicle and place it on jack stands or ramps, ensuring that it is stable and securely supported. Ensure you lift it high enough to access the clutch fork.
Step 3: Locate the clutch cable assembly. Follow the clutch cable from the engine compartment down to the transmission area. Identify where it attaches to the clutch fork.
Step 4: Disconnect the clutch cable from the clutch fork. Use a 10mm wrench or socket to loosen the bolt attaching the clutch cable to the clutch fork. Remove the bolt and detach the cable.
Step 5: Unbolt the clutch master cylinder from the transmission bell housing. Use a 17mm wrench or socket to remove the bolts holding the clutch master cylinder to the transmission bell housing.
Step 6: Disconnect the clutch line from the clutch master cylinder. Remove the plastic clip securing the clutch line to the clutch master cylinder and gently disconnect the line from the cylinder.
Step 7: Support the transmission. Use a suitable support, such as a block of wood, under the transmission to prevent it from moving while you work.
Step 8: Locate and remove the clutch fork pivot bolt. The clutch fork pivot bolt is usually located on the transmission bell housing. Use a 17mm wrench or socket to loosen and remove the bolt. Ensure you use the correct socket for the type of bolt used on your specific Punto model.
Step 9: Remove the clutch fork from the transmission housing. Use a pry bar or crowbar to gently pry the clutch fork off the ball stud on the pivot pin. Be careful not to damage the clutch release mechanism. Once the fork is unhooked, remove it from the transmission housing.
Tip: Use a flashlight if necessary to see better in tight or dark areas.
Note: The clutch pressure plate and release bearing may also need to be removed as part of a clutch replacement. If so, additional steps and specialized tools may be required, and it is recommended to consult a professional or refer to the vehicle-specific repair manual for further instructions.
